How to Remove Tile from a Bathroom Wall
Are you wondering how to remove tile from a bathroom wall? Follow along with DustRam® for the inside scoop. A bathroom demolition seems to be where most homeowners feel comfortable starting a home remodel. Even if one does not know precisely how to demo a bathroom, any small steps one takes provides a considerable boost in resale value and the ambiance of the space.
The homeowner could begin with adding something as straightforward as bathroom tile covers and swapping out a removable backsplash to freshen up the room. One could also go more in-depth by replacing a bathroom floor or removing tile from a bathroom wall. Take a look at our videos to see some of our past projects.
Bathroom Tile Backsplash Removal is Not for the Faint of Heart
Tile replacement in a bathroom could be done within a weekend with an adequately prepped wall or floor. However, tile removal itself is not for the faint of heart. Full removal can be done in a reasonable amount of time if one knows how to remove a ceramic tile floor and has some experience doing so. Merely removing a tile backsplash can be done as a first-time demolition if the homeowner applies patience and allows for the time necessary to finish it correctly. With the decision for replacing bathroom tile made, the homeowner will start with determining which areas to change and the new material to put in.
Step 1: Learning How to Remove Grout from Tile
Removing a ceramic tile floor is similar to how to remove tile from the bathroom wall up to a point. To begin either one, the homeowner needs to choose how to remove the grout from the tile. This is accomplished by either a hand-held tool designed to scrape out the grout or more effortlessly with the use of an oscillating tool or reciprocating saw. Grout removal allows for removing of bathroom tile whether it is on the floor or bathtub wall tile with less effort by the homeowner.
Step 2: Finding the Right Tile Removal Tool
The best way to remove tile on a do-it-yourself project is with a ceramic tile removal tool after the grout has been removed or loosened. A marketed floor tile removal tool or a standard putty knife can be used as a tile lifter to raise the old tiles off the drywall or a floor cleanly; a tile breaker can be used if the tiles are difficult to remove, or if one does not intend to try reusing the tiles. It is much more challenging to save the surface behind bathroom wall tiles versus removing tile from a concrete floor as drywall and backer board are more fragile compared to concrete. Check out our tile removal equipment.
Step 3: Applying Tile Adhesive Remover to Eliminate Residual Glue
After removing the ceramic tile, the homeowner will need to apply a tile adhesive remover to eliminate the residual glue. The use of a sander or grinder is also recommended as an option to remove the thinset. For tile on drywall, the drywall underneath may be reused if it sustains only minimal damage during the tile removal. Usually, it is simpler to replace the backing with a fresh board as wall tiles rarely remove neatly and tend to pull chunks of the drywall as tiles come off.
Instead of tapping off each tile individually, one can cut out sections of drywall while using care around water pipes and support beams; then handily tack up a blank panel and begin applying the new paint or tile. This is often the easiest and quickest way for how to prepare shower walls for tile or any area to tile a bathroom wall. Instead of going through the stress and having to learn how to remove tile from a bathroom wall, hire an expert to do the hard labor. Learn about the dangers of crystalline silica dust exposure from tile removal.
Check Out Our FAQS Page For More Information
Hire a Dust Free Bathroom Tile Removal Expert
The most uncomplicated decision for how best to remove a bathroom tile floor or how to remove tile from a bathroom wall would be to have a licensed professional contractor complete the work. If one decides to DIY, the homeowner must be ready for dust covering every inch of their home, including walls, shelving, inside cabinets, air ducts, electronics, and more. Now time, effort, and money must be allotted for intensive cleansing of the house. There is also a lot of back-breaking work and a necessity for the proper capture and disposal of dangerous materials when dealing with any tile removal.
Having a licensed contractor such as Arizona Home Floors, LLC is the perfect choice for the discerning client who wants to have thoroughly dust free tile removal at their home. Our team uses the patented DustRam® equipment that provides dustless tile removal in a house whether those tiles are on floors or walls. When using DustRam®, the home is promptly ready for the next step to retile the bathroom, replacing shower tiles, or replacing a tile floor with a new fresh style. The homeowner can proceed with their bathroom remodel quickly knowing a DustRam® Certified Contractor has efficiently and cleanly prepped their home.
Related Post: DustRam® is ahead of the competition. Get the inside scoop and find out what makes us different than the rest.
